Bladesmith

Bladesmith

Cutting at a 45-degree angle to assemble the mosaic.

Cutting at a 45-degree angle to assemble the mosaic.

Making a false tilapia string. Using an angle table to perform the initial shaping of the false string, I finished it with a file in a smoothing motion.

Making a false tilapia string. Using an angle table to perform the initial shaping of the false string, I finished it with a file in a smoothing motion.

Heat treat

Recently finished Magnacut tanto with some custom G10 scales. What do yall think

Recently finished Magnacut tanto with some custom G10 scales. What do yall think

I've made a few Sentinels in 14c28n with G10 scales

I've made a few Sentinels in 14c28n with G10 scales

24K gold inlay

Using a custom angle table to machine a false edge. The angle isn’t fixed — it’s set by eye, depending on the blade’s design and thickness.

Using a custom angle table to machine a false edge. The angle isn’t fixed — it’s set by eye, depending on the blade’s design and thickness.

Finished today

Sharpened this piece using a ceramic plate. No stone, no tricks — just ceramic and patience.

Sharpened this piece using a ceramic plate. No stone, no tricks — just ceramic and patience.

Activating the sandpaper grains.

Activating the sandpaper grains.

Making the pommel and ball of a beautiful gaúcha.

Making the pommel and ball of a beautiful gaúcha.

An easy way to symmetrically ovalize the pommel.

An easy way to symmetrically ovalize the pommel.

A different style of blacksmith knife

A different style of blacksmith knife

Some call it dangerous, I call it artisanal. How I make the carrapeta of a gaúcha using a grinder and drill.

Some call it dangerous, I call it artisanal. How I make the carrapeta of a gaúcha using a grinder and drill.

machining a Chef's knife machining 3M Cubitron III sandpaper

machining a Chef's knife machining 3M Cubitron III sandpaper

Have you ever seen diesel oil bubbling during heat treatment?

Have you ever seen diesel oil bubbling during heat treatment?

Is it sharp enough?

Is it sharp enough?

Using a round file to start the false thread.

Using a round file to start the false thread.

I used a steel plate to make a tighter radius on the collar, using Cubitron ll 80 grit sandpaper.

I used a steel plate to make a tighter radius on the collar, using Cubitron ll 80 grit sandpaper.

🔥Gomai Nakiri | 52100 Core • Damascus & Nickel Shim Jacket • S-Grind for Superior Food Release🔥

🔥Gomai Nakiri | 52100 Core • Damascus & Nickel Shim Jacket • S-Grind for Superior Food Release🔥"

Surface grinder attachment

Surface grinder attachment

With excellence it is said

With excellence it is said

Collar carved with lime inspired by Greek columns.

Collar carved with lime inspired by Greek columns.

I don't think I have seen this here before

I don't think I have seen this here before

Browse Other Categories