Bladesmith

Bladesmith

Finished today

Sharpened this piece using a ceramic plate. No stone, no tricks — just ceramic and patience.

Sharpened this piece using a ceramic plate. No stone, no tricks — just ceramic and patience.

Activating the sandpaper grains.

Activating the sandpaper grains.

Making the pommel and ball of a beautiful gaúcha.

Making the pommel and ball of a beautiful gaúcha.

An easy way to symmetrically ovalize the pommel.

An easy way to symmetrically ovalize the pommel.

A different style of blacksmith knife

A different style of blacksmith knife

Some call it dangerous, I call it artisanal. How I make the carrapeta of a gaúcha using a grinder and drill.

Some call it dangerous, I call it artisanal. How I make the carrapeta of a gaúcha using a grinder and drill.

machining a Chef's knife machining 3M Cubitron III sandpaper

machining a Chef's knife machining 3M Cubitron III sandpaper

Have you ever seen diesel oil bubbling during heat treatment?

Have you ever seen diesel oil bubbling during heat treatment?

Is it sharp enough?

Is it sharp enough?

Using a round file to start the false thread.

Using a round file to start the false thread.

I used a steel plate to make a tighter radius on the collar, using Cubitron ll 80 grit sandpaper.

I used a steel plate to make a tighter radius on the collar, using Cubitron ll 80 grit sandpaper.

🔥Gomai Nakiri | 52100 Core • Damascus & Nickel Shim Jacket • S-Grind for Superior Food Release🔥

🔥Gomai Nakiri | 52100 Core • Damascus & Nickel Shim Jacket • S-Grind for Superior Food Release🔥"

Surface grinder attachment

Surface grinder attachment

With excellence it is said

With excellence it is said

Collar carved with lime inspired by Greek columns.

Collar carved with lime inspired by Greek columns.

I don't think I have seen this here before

I don't think I have seen this here before

1075 steel, stainless layered handle, 4mm countersunk and tapped bolts. All to do now is hand sand all the scratches out 🤕 I call it the ‘Rhino’

1075 steel, stainless layered handle, 4mm countersunk and tapped bolts. All to do now is hand sand all the scratches out 🤕 I call it the ‘Rhino’

Got a lot of work done on the bhuj/cleaver. I put an ever so slight s grind (if I understand what an s grind is) on it using the disc sanders edge at an angle. I am sad I won't get those scales on the bolster without grinding too thin, but I'll wire brush

Got a lot of work done on the bhuj/cleaver. I put an ever so slight s grind (if I understand what an s grind is) on it using the disc sanders edge at an angle. I am sad I won't get those scales on the bolster without grinding too thin, but I'll wire brush

Browse Other Categories